山东领锐DEL皮带称重给料机 配料皮带秤

DEL/DEM皮带称重给料机
DEL/DEM Belt Weighing Feeder

产品概述Product Introduction
       DEL(M)系列皮带称重给料机（调速或恒速皮带秤）是对各种散块状、颗粒状、粉状等物料实行连续称重，批次给料、配料的**动态计量设备。广泛应用于建材、水泥、化工、没炭、矿山、陶瓷、玻璃、冶金、粮食、化肥、饲料、港口、电力、焦化、环保等行业
      DEL (M) series of belt weighing feeder (Adjust speed or Constant speed belt scales) is fit for all loose bulk, granular, powdery materials implement continuous weighing,  dynamic metering and charge mixture equipment. Widely used in building materials, cement, chemical, coal, mining, ceramics, glass, metallurgy, food, fertilizer, feed, ports, electricity, coking industry, environmental protection etc.

工作原理Working Principle
来自皮带上物料的重量信号和皮带运行的速度信号一同传送到微处理控制器，自动计算出物料的瞬时流量。通过连续不断的比较设定流量与实际物料的瞬时流量，从而调节皮带运行的速度，使实际物料流量保持在设定流量值上。
The weight ** and speed ** belt running from the belt material to transfer to the micro processing controller, automatically calculate the instantaneous flow of materials. The transient flow through the continuous setting flow and the actual material, to adjust the belt running speed, so that the actual material flow is maintained in the set value of flow.

技术指标Technical Indicators
计量精度：≤ ±0.5%
给料输送能力：0.01－2000T/H
皮带宽度：300-2600mm
计量方式：调速、恒速
流量调节范围：1：10
工作方式：连续或批次
Measurement precision：≤ ±0.5%
Transport capacity of feeding：0.01－2000T/H
Belt width：300-2600mm
Metering mode：Variable speed, Constant speed
Flow regulation scope：1：10
Working mode：Continuous or Batch

性能特点Performance characteristics
1、全悬浮式直接计量结构，皮带自动张力调节和自动纠偏功能。
2、采用高精度的数字称重模块，数字传输，分辨率高、信号无衰减、抗干扰强。
3、控制器采用触摸显示技术，中英文图形化显示，显示直观，操作简单。
4、可接485通讯，CAN通讯，DCS,PLC等接口。
5、GPRS无线数传功能，可以短信报表、远程诊断、校秤等功能。
1、Weighing structure with suspended direct measurement .
2、By using high precision digital weighing module, digital transmission, high resolution, no ** attenuation, no interference.
3、The controller uses touch display technology，Chinese- English graphical display, Intuitive display, operation simple.
4、It can connect 485 communications; CAN communication, DCS, PLC etc. interface.
5、GPRS wireless data transmission function, can SMS report, remote diagnosis, remote control scales and other functions.

结构图Structure diagram


选型表Selection sheet

注:以上型号为标准规格，主从滚筒中心距标准还有1800、2500、3000、3500、4000等标准长度。非标型号可根据用户要求定制。
Remark: The above models are standard, master-slave roller center distance has1800, 2500, 3000, 3500, 4000 standard length. Non standard models can be customized according to user requirements.


皮带秤  厂家联系电话：
皮带秤  厂家地址：山东省临朐县纸坊工业园仲临路825号
皮带秤  厂家邮件地址：sdlrdz@.